- Two axis servo sprayers have precise and adjustable spraying and air blowing along with the X and Y axis. Servo motor adopts delta make drive motor with high precision control.
The pinion gear and its rack drive system made up with special coating to prevent from rust and lubrication to gear and rack improves the stable and long term operation of the equipment.
For fix and moving half moulds, sprayer can be controlled independently and nozzle can be easily adjusted at any direction. There are also optional extended nozzles for any complex mould. Nozzles are easily removable for cleaning and it get block easily.
- Servo sprayers adopts the touch screen display and spraying setting can easily edited on the human- machine interface on it. It also has fault digngosis display function for convenient use and maintenance.
- Two axis servo sprayer can move around while spraying and also can set for fix point spraying, the lower layer of nozzles is separate and specially for powerful air blow which effectively removes the residues above the mould.
| Specification / Model | MTS2A1 | MTS2A2 |
|---|---|---|
| Applicable to die casting machine | 1600T – 2000T | 2500T – 3000T |
| Number of spraying nozzles | Total 60 nos nozzles are provided (30 Nos for fix side and 30 for moving side respectively) | Total 70 nos nozzles are provided (35 Nos for fix side and 35 for moving side respectively) |
| High pressure air blowing nozzles | Total 30 nos nozzles are provided (15 Nos for fix side and 15 for moving side respectively) | Total 34 nos nozzles are provided (17 Nos for fix side and 17 for moving side respectively) |
| Air supply pressure | 6 kg/cm^2 | 6 kg/cm^2 |
| Water source pressure | 4 kg/cm^2 | 4 kg/cm^2 |
| Release agent tube diameter | PT 3/4" | PT 3/4" |
| Control air source tube diameter | 3/8" | 3/8" |
| Air source tube diameter | 2" | 2" |
| Longitudinal travel | 1700 mm | 1900 mm |
| Transverse travel | 1450 mm | 1650 mm |
| Ascending speed | 1.5 m/sec | 1.5 m/sec |
| Descending speed | 1.5 m/sec | 1.5 m/sec |
| Cycle Time | 10 sec | 12 sec |